There is an error called Linksys router blinking orange light if you have a Linksys wifi router. There are a couple of errors that a person or user faces with the installation of Linksys wifi router, but this error is kind of way more irritating and difficult to deal with. It is difficult because, first of all, the reasons for the error to occur are in number, so troubleshooting it out has to be specific as per that. Sometimes, it is required to go through all the methods to bring the router out from the error of Linksys Router Blinking Orange Light to work properly.
Though Linksys wifi routers and extenders are mostly unproblematic but they are a machine or say they are a device. And it is fine because it’s a device, and errors occur with them whenever they face any kind of inconvenience with their setup, configuration, firmware, or software.
You do not have to worry about this blinking or flashing of an orange light error on the power LED indicator of your Linksys router because we have a solution to the problem. As it is well said, every problem comes with its solutions. So, first of all, we will be looking towards the reasons for the error to occur, then we will be resolving the error of Linksys router blinking orange light.
Why is my Linksys router blinking orange light? Troubleshoots and Fixes
As we talked about it earlier that there can be a number of reasons for the error to occur. Let’s see what the reasons for the Linksys router blinking orange light error are?
Malfunctioned Firmware –
The orange light can blink when the firmware is at fault; that can be a reason. Sometimes people or the user tend to update the wrong firmware or the corrupted firmware, then it may happen. There could be times when the pre-existing firmware itself has issues with it or due to any number of means it went faulty.
How to Troubleshoot malfunctioned firmware errors?
So, how to troubleshoot the Linksys router blinking orange light error if it was caused by means of faulty or corrupted firmware. All you need to do is to either replace or update the correct firmware or you can just reset the device. Once you reset your Linksys device, it will go back to its factory-based settings. From there, you can update the correct firmware. Do not make the same mistake again.
Connectivity Issue –
About the connectivity issue, there are a couple of things that may have loose the connection or their connection has been interrupted. Check for the following connections if they are fine –
- Power Connection
- Cable Connection
- Internet Connection
You have to make sure that all these connections are proper. If they are losing connectivity, then Linksys blinking orange light error will occur.
How to troubleshoot the connectivity issue of the Linksys router?
If the power connection is at fault, then be sure of the fact that your Linksys router or any networking device needs a proper electricity connection to function properly. So, check this and correct it.
For the cable connection, sometimes the cable connections seem fine, but they aren’t. Check if the ethernet cable connection is not at all loose. If it is, take the cable out and plugin back again. Another thing, ethernet cables are sensitive, so do check for the issue of worn-out cable. If it is damaged, replace it ASAP. Take this advice – always keep spare cables.
The default in internet connection has two segregation; one internet connection is bad from the end of your internet service provider. The second one is the connectivity of the internet is not proper between the home modem and the Linksys router. So, check for both. If it is from your service provider’s end, then contact them. But if it has occurred due to the second cause, then make sure to bring the Linksys provider in the closer vicinity of your home modem/ router.
Problematic MAC address –
There can be a proper and complete reason that the MAC address has gone default and caused the blinking orange light issue on your Linksys wifi router. There are times when the home modem is not able to detect the MAC address of the Linksys router. Do not worry. The solution is written down here.
How to troubleshoot the Problematic MAC address issue on my Linksys router?
You need to log in to the Linksys router on your web browser. Once you do that, go to the option of Setup. Once you are there, now you have to the sub-option called ‘MAC address clone. Enable this setting, and do not forget to save it. Once you do this, you are good to go.
Over Heating of Router –
Yes, it is a device. We are saying it again – it can overheat. Check for that because all the devices needed to be in a specific temperature range to operate. If it is less or above than it – it tends to cause the issue. This can be one of the reasons for Linksys Router Blinking Orange Light error.
How to troubleshoot the overheating error of the Linksys router?
Make sure that your networking devices stay within the temperature range of 0 degrees to 40 degrees Celsius. It applies the same to the Linksys router too.
The Final Solution for Linksys Router Blinking Orange Light:
When no solution works with the Linksys Router Blinking Orange Light issue, then you have to reboot the router. Just saying if that does not work too – please press the reset button of your Linksys router. Because it will make it all fine and do re-configure.
Conclusion
We are hoping that you are no longer facing the Linksys Router Blinking Orange Light error, but in case you are. Do reach out to our team of tech support experts, and we are here to help you.